LinuxCNC VFD ModBus ClassicLadder RS485 / RS232 / USB

Kod: Zaznacz cały

# Generated by stepconf 1.1 at Sun Jan  2 20:53:33 2022
# Jeśli zmodyfikujesz ten plik zmainy zostaną
# nadpisane gdy uruchomisz ponownie Stepconf

[EMC]
MACHINE = MB2HALV1
DEBUG = 0

[DISPLAY]
DISPLAY = axis
EDITOR = gedit
POSITION_OFFSET = RELATIVE
POSITION_FEEDBACK = ACTUAL
ARCDIVISION = 64
GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in
MAX_FEED_OVERRIDE = 1.2
MIN_SPINDLE_OVERRIDE = 0.5
MAX_SPINDLE_OVERRIDE = 1.2
DEFAULT_LINEAR_VELOCITY = 2.50
MIN_LINEAR_VELOCITY = 0
MAX_LINEAR_VELOCITY = 25.00
INTRO_GRAPHIC = linuxcnc.gif
INTRO_TIME = 5
PROGRAM_PREFIX = /home/cnc/linuxcnc/nc_files
INCREMENTS = 5mm 1mm .5mm .1mm .05mm .01mm .005mm

[FILTER]
PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
PROGRAM_EXTENSION = .py Python Script
png = image-to-gcode
gif = image-to-gcode
jpg = image-to-gcode
py = python

[MACHINE]
GWINTOWNICA=0
PILA=1

[TASK]
TASK = milltask
CYCLE_TIME = 0.010

[RS274NGC]
PARAMETER_FILE = linuxcnc.var

[EMCMOT]
EMCMOT = motmod
COMM_TIMEOUT = 1.0
COMM_WAIT = 0.010
BASE_PERIOD = 100000
SERVO_PERIOD = 1000000

[HAL]
HALFILE = MB2HALV1.hal
HALFILE = custom.hal
POSTGUI_HALFILE = custom_postgui.hal

[TRAJ]
AXES = 3
COORDINATES = X Y Z
LINEAR_UNITS = mm
ANGULAR_UNITS = degree
CYCLE_TIME = 0.010
DEFAULT_VELOCITY = 2.50
MAX_VELOCITY = 25.00

[EMCIO]
EMCIO = io
CYCLE_TIME = 0.100
TOOL_TABLE = tool.tbl

[AXIS_0]
TYPE = LINEAR
HOME = 0.0
MAX_VELOCITY = 25.0
MAX_ACCELERATION = 750.0
STEPGEN_MAXACCEL = 937.5
SCALE = 80.0
FERROR = 1
MIN_FERROR = .25
MIN_LIMIT = -0.001
MAX_LIMIT = 200.0
HOME_OFFSET = 0.0

[AXIS_1]
TYPE = LINEAR
HOME = 0.0
MAX_VELOCITY = 25.0
MAX_ACCELERATION = 750.0
STEPGEN_MAXACCEL = 937.5
SCALE = 80.0
FERROR = 1
MIN_FERROR = .25
MIN_LIMIT = -0.001
MAX_LIMIT = 200.0
HOME_OFFSET = 0.0

[AXIS_2]
TYPE = LINEAR
HOME = 0.0
MAX_VELOCITY = 25.0
MAX_ACCELERATION = 750.0
STEPGEN_MAXACCEL = 937.5
SCALE = 80.0
FERROR = 1
MIN_FERROR = .25
MIN_LIMIT = -100.0
MAX_LIMIT = 0.001
HOME_OFFSET = 0.0

Kod: Zaznacz cały

# Generated by stepconf 1.1 at Sun Jan  2 20:53:33 2022
# Jeśli zmodyfikujesz ten plik zmainy zostaną
# nadpisane gdy uruchomisz ponownie Stepconf
loadrt trivkins
loadrt [EMCMOT]EMCMOT base_period_nsec=[EMCMOT]BASE_PERIOD servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[TRAJ]AXES
loadrt hal_parport cfg="0 out"
setp parport.0.reset-time 5000
loadrt stepgen step_type=0,0,0
loadrt classicladder_rt numPhysInputs=15 numPhysOutputs=15 numS32in=10 numS32out=10 numFloatIn=10 numFloatOut=10

addf parport.0.read base-thread
addf stepgen.make-pulses base-thread
addf parport.0.write base-thread
addf parport.0.reset base-thread

addf stepgen.capture-position servo-thread
addf motion-command-handler servo-thread
addf motion-controller servo-thread
addf classicladder.0.refresh servo-thread
addf stepgen.update-freq servo-thread
net spindle-cmd-rpm     <= motion.spindle-speed-out
net spindle-cmd-rpm-abs <= motion.spindle-speed-out-abs
net spindle-cmd-rps     <= motion.spindle-speed-out-rps
net spindle-cmd-rps-abs <= motion.spindle-speed-out-rps-abs
net spindle-at-speed    => motion.spindle-at-speed

net estop-out       => parport.0.pin-01-out
net xstep           => parport.0.pin-02-out
setp parport.0.pin-02-out-reset 1
net xdir            => parport.0.pin-03-out
net ystep           => parport.0.pin-04-out
setp parport.0.pin-04-out-reset 1
net ydir            => parport.0.pin-05-out
net zstep           => parport.0.pin-06-out
setp parport.0.pin-06-out-reset 1
net zdir            => parport.0.pin-07-out
net astep           => parport.0.pin-08-out
setp parport.0.pin-08-out-reset 1
net adir            => parport.0.pin-09-out

setp stepgen.0.position-scale [AXIS_0]SCALE
setp stepgen.0.steplen 1
setp stepgen.0.stepspace 0
setp stepgen.0.dirhold 35000
setp stepgen.0.dirsetup 35000
setp stepgen.0.maxaccel [AXIS_0]STEPGEN_MAXACCEL
net xpos-cmd axis.0.motor-pos-cmd => stepgen.0.position-cmd
net xpos-fb stepgen.0.position-fb => axis.0.motor-pos-fb
net xstep <= stepgen.0.step
net xdir <= stepgen.0.dir
net xenable axis.0.amp-enable-out => stepgen.0.enable

setp stepgen.1.position-scale [AXIS_1]SCALE
setp stepgen.1.steplen 1
setp stepgen.1.stepspace 0
setp stepgen.1.dirhold 35000
setp stepgen.1.dirsetup 35000
setp stepgen.1.maxaccel [AXIS_1]STEPGEN_MAXACCEL
net ypos-cmd axis.1.motor-pos-cmd => stepgen.1.position-cmd
net ypos-fb stepgen.1.position-fb => axis.1.motor-pos-fb
net ystep <= stepgen.1.step
net ydir <= stepgen.1.dir
net yenable axis.1.amp-enable-out => stepgen.1.enable

setp stepgen.2.position-scale [AXIS_2]SCALE
setp stepgen.2.steplen 1
setp stepgen.2.stepspace 0
setp stepgen.2.dirhold 35000
setp stepgen.2.dirsetup 35000
setp stepgen.2.maxaccel [AXIS_2]STEPGEN_MAXACCEL
net zpos-cmd axis.2.motor-pos-cmd => stepgen.2.position-cmd
net zpos-fb stepgen.2.position-fb => axis.2.motor-pos-fb
net zstep <= stepgen.2.step
net zdir <= stepgen.2.dir
net zenable axis.2.amp-enable-out => stepgen.2.enable

net estop-out <= iocontrol.0.user-enable-out
net estop-out => iocontrol.0.emc-enable-in

loadusr -W hal_manualtoolchange
net tool-change iocontrol.0.tool-change => hal_manualtoolchange.change
net tool-changed iocontrol.0.tool-changed <= hal_manualtoolchange.changed
net tool-number iocontrol.0.tool-prep-number => hal_manualtoolchange.number
net tool-prepare-loopback iocontrol.0.tool-prepare => iocontrol.0.tool-prepared

# Uruchom Classicladder bez GUI ( PLC GUI w AXIS GUI
loadusr classicladder --nogui custom.clp

Kod: Zaznacz cały

# Tutaj dodaj swoje polecenia HAL
# Ten plik nie zostanie nadpisany gdy uruchomisz ponownie Stepconf


#VFD N700E MB2HAL

loadusr -Wn bestia mb2hal config=mb2hal.ini

loadrt near names=near.speed
addf near.speed servo-thread



net spindle-cw classicladder.0.in-00 <= motion.spindle-on 
net spindle-ccw classicladder.0.in-01 <= motion.spindle-forward 
net spindle-start classicladder.0.in-02 <= motion.spindle-reverse 



net spindle-runmode bestia.runmode.command.float <= classicladder.0.floatout-00

net spindle-cmd-rpm-abs => classicladder.0.floatin-01
net spindle-Hz classicladder.0.floatout-02 => bestia.HzOut.Hz.float



#czeka na osiagniecie obrotow zadanych
# Set motion.spindle-at-speed

net spindle-cmd-rpm-abs near.speed.in1

net spindle-speed-in bestia.HzIn.00.float => near.speed.in2

setp near.speed.scale 1.05

net spindle-at-speed <= near.speed.out 

setp parport.0.pin-16-out [MACHINE]GWINTOWNICA
setp parport.0.pin-17-out [MACHINE]PILA

#%W1=(%IF1-0)*(5000-0)/(3000-0)+0

Kod: Zaznacz cały

_FILES_CLASSICLADDER
_FILE-timers.csv
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
_/FILE-timers.csv
_FILE-modbusioconf.csv
#VER=1.0
_/FILE-modbusioconf.csv
_FILE-rung_0.csv
#VER=2.0
#LABEL=
#COMMENT=
#PREVRUNG=1
#NEXTRUNG=-1
0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0
0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0
0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0
0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0
0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0
0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0
_/FILE-rung_0.csv
_FILE-ioconf.csv
#VER=1.0
_/FILE-ioconf.csv
_FILE-general.txt
PERIODIC_REFRESH=1
SIZE_NBR_RUNGS=100
SIZE_NBR_BITS=20
SIZE_NBR_WORDS=20
SIZE_NBR_TIMERS=10
SIZE_NBR_MONOSTABLES=10
SIZE_NBR_COUNTERS=10
SIZE_NBR_TIMERS_IEC=10
SIZE_NBR_PHYS_INPUTS=15
SIZE_NBR_PHYS_OUTPUTS=15
SIZE_NBR_ARITHM_EXPR=100
SIZE_NBR_SECTIONS=10
SIZE_NBR_SYMBOLS=160
_/FILE-general.txt
_FILE-arithmetic_expressions.csv
#VER=2.0
0000,@310/0@=1
0001,@310/0@=2
0002,@310/0@=4
0003,@310/2@=(@300/1@-0)*(5000-0)/(2855-0)+0
_/FILE-arithmetic_expressions.csv
_FILE-symbols.csv
#VER=1.0
%I0,%I0,
%I1,%I1,
%I2,%I2,
%I3,%I3,
%I4,%I4,
%I5,%I5,
%I6,%I6,
%I7,%I7,
%I8,%I8,
%I9,%I9,
%I10,%I10,
%I11,%I11,
%I12,%I12,
%I13,%I13,
%I14,%I14,
%Q0,%Q0,
%Q1,%Q1,
%Q2,%Q2,
%Q3,%Q3,
%Q4,%Q4,
%Q5,%Q5,
%Q6,%Q6,
%Q7,%Q7,
%Q8,%Q8,
%Q9,%Q9,
%Q10,%Q10,
%Q11,%Q11,
%Q12,%Q12,
%Q13,%Q13,
%Q14,%Q14,
%B0,%B0,
%B1,%B1,
%B2,%B2,
%B3,%B3,
%B4,%B4,
%B5,%B5,
%B6,%B6,
%B7,%B7,
%B8,%B8,
%B9,%B9,
%B10,%B10,
%B11,%B11,
%B12,%B12,
%B13,%B13,
%B14,%B14,
%B15,%B15,
%B16,%B16,
%B17,%B17,
%B18,%B18,
%B19,%B19,
%W0,%W0,
%W1,%W1,
%W2,%W2,
%W3,%W3,
%W4,%W4,
%W5,%W5,
%W6,%W6,
%W7,%W7,
%W8,%W8,
%W9,%W9,
%W10,%W10,
%W11,%W11,
%W12,%W12,
%W13,%W13,
%W14,%W14,
%W15,%W15,
%W16,%W16,
%W17,%W17,
%W18,%W18,
%W19,%W19,
%IW0,%IW0,
%IW1,%IW1,
%IW2,%IW2,
%IW3,%IW3,
%IW4,%IW4,
%IW5,%IW5,
%IW6,%IW6,
%IW7,%IW7,
%IW8,%IW8,
%IW9,%IW9,
%QW0,%QW0,
%QW1,%QW1,
%QW2,%QW2,
%QW3,%QW3,
%QW4,%QW4,
%QW5,%QW5,
%QW6,%QW6,
%QW7,%QW7,
%QW8,%QW8,
%QW9,%QW9,
%IF0,%IF0,
%IF1,%IF1,
%IF2,%IF2,
%IF3,%IF3,
%IF4,%IF4,
%IF5,%IF5,
%IF6,%IF6,
%IF7,%IF7,
%IF8,%IF8,
%IF9,%IF9,
%QF0,%QF0,
%QF1,%QF1,
%QF2,%QF2,
%QF3,%QF3,
%QF4,%QF4,
%QF5,%QF5,
%QF6,%QF6,
%QF7,%QF7,
%QF8,%QF8,
%QF9,%QF9,
%T0,%T0,Old Timer
%T1,%T1,Old Timer
%T2,%T2,Old Timer
%T3,%T3,Old Timer
%T4,%T4,Old Timer
%T5,%T5,Old Timer
%T6,%T6,Old Timer
%T7,%T7,Old Timer
%T8,%T8,Old Timer
%T9,%T9,Old Timer
%TM0,%TM0,New Timer
%TM1,%TM1,New Timer
%TM2,%TM2,New Timer
%TM3,%TM3,New Timer
%TM4,%TM4,New Timer
%TM5,%TM5,New Timer
%TM6,%TM6,New Timer
%TM7,%TM7,New Timer
%TM8,%TM8,New Timer
%TM9,%TM9,New Timer
%M0,%M0,One-shot
%M1,%M1,One-shot
%M2,%M2,One-shot
%M3,%M3,One-shot
%M4,%M4,One-shot
%M5,%M5,One-shot
%M6,%M6,One-shot
%M7,%M7,One-shot
%M8,%M8,One-shot
%M9,%M9,One-shot
%C0,%C0,Counter
%C1,%C1,Counter
%C2,%C2,Counter
%C3,%C3,Counter
%C4,%C4,Counter
%C5,%C5,Counter
%C6,%C6,Counter
%C7,%C7,Counter
%C8,%C8,Counter
%C9,%C9,Counter
%E0,%E0,Error Flag Bit
%E1,%E1,Error Flag Bit
%E2,%E2,Error Flag Bit
%E3,%E3,Error Flag Bit
%E4,%E4,Error Flag Bit
%E5,%E5,Error Flag Bit
%E6,%E6,Error Flag Bit
%E7,%E7,Error Flag Bit
%E8,%E8,Error Flag Bit
%E9,%E9,Error Flag Bit
_/FILE-symbols.csv
_FILE-timers_iec.csv
1,0,0
1,0,0
1,0,0
1,0,0
1,0,0
1,0,0
1,0,0
1,0,0
1,0,0
1,0,0
_/FILE-timers_iec.csv
_FILE-counters.csv
0
0
0
0
0
0
0
0
0
0
_/FILE-counters.csv
_FILE-com_params.txt
MODBUS_MASTER_SERIAL_PORT=
MODBUS_MASTER_SERIAL_SPEED=9600
MODBUS_MASTER_SERIAL_DATABITS=8
MODBUS_MASTER_SERIAL_STOPBITS=1
MODBUS_MASTER_SERIAL_PARITY=0
MODBUS_ELEMENT_OFFSET=0
MODBUS_MASTER_SERIAL_USE_RTS_TO_SEND=0
MODBUS_MASTER_TIME_INTER_FRAME=100
MODBUS_MASTER_TIME_OUT_RECEIPT=500
MODBUS_MASTER_TIME_AFTER_TRANSMIT=0
MODBUS_DEBUG_LEVEL=0
MODBUS_MAP_COIL_READ=0
MODBUS_MAP_COIL_WRITE=0
MODBUS_MAP_INPUT=0
MODBUS_MAP_HOLDING=0
MODBUS_MAP_REGISTER_READ=0
MODBUS_MAP_REGISTER_WRITE=0
_/FILE-com_params.txt
_FILE-sequential.csv
#VER=1.0
_/FILE-sequential.csv
_FILE-rung_1.csv
#VER=2.0
#LABEL=
#COMMENT=
#PREVRUNG=0
#NEXTRUNG=0
1-0-50/0 , 1-0-50/1 , 2-0-60/2 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 50-0-60/1
0-0-50/0 , 0-0-50/0 , 0-0-50/0 , 0-0-50/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 99-1-0/0 , 99-0-0/0 , 60-0-60/0
1-0-50/0 , 1-0-50/2 , 2-0-60/1 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 50-0-60/2
0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 0-0-0/0 , 99-1-0/0 , 99-0-0/0 , 60-0-0/1
2-0-60/1 , 2-0-60/2 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 99-0-0/0 , 99-0-0/0 , 60-0-0/2
9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 9-0-0/0 , 99-0-0/0 , 99-0-0/0 , 60-0-0/3
_/FILE-rung_1.csv
_FILE-monostables.csv
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
1,0
_/FILE-monostables.csv
_FILE-sections.csv
#VER=1.0
#NAME000=Prog1
000,0,-1,1,0,0
_/FILE-sections.csv
_/FILES_CLASSICLADDER

Kod: Zaznacz cały

#Infos:
# 05.01.2022
#VFD N700E 2.2kW
#Load the modbus HAL userspace module as the examples below,
#change to match your own HAL_MODULE_NAME and .ini file name
#Using HAL_MODULE_NAME=mb2hal or nothing (default): loadusr -W mb2hal config=config_file.ini
#Using HAL_MODULE_NAME=mymodule: loadusr -Wn mymodule mb2hal config=config_file.ini

#dodaj w custom.hal loadusr -Wn bestia mb2hal config=mb2hal.ini
#Żeby to działało musisz zaltualizować MB2HAL 2,7,15 (chyba że masz nantowszy linuxCNC podobno jest OK 2.8...)



[MB2HAL_INIT]

#OPTIONAL: Debug level of init and INI file parsing.
# 0 = silent.
# 1 = error messages (default).
# 2 = OK confirmation messages.
# 3 = debugging messages.

INIT_DEBUG=3

#OPTIONAL: HAL module (component) name. Defaults to "mb2hal".

HAL_MODULE_NAME=bestia 

#OPCJONALNIE: Wstaw opóźnienie „FLOAT sekund” między transakcjami w kolejności
#aby nie mieć dużo logów i ułatwić debugowanie.
#Przydatne, gdy używasz DEBUG=3 (NOT INIT_DEBUG=3)
#Dotyczy WSZYSTKICH transakcji.
#Użyj "0.0" dla normalnej aktywności.

SLOWDOWN=0.0

#REQUIRED: The number of total Modbus transactions. There is no maximum.

TOTAL_TRANSACTIONS=4
#One transaction section is required per transaction, starting at 00 and counting up sequentially.
#If there is a new link (not transaction), you must provide the REQUIRED parameters 1st time.
#Warning: Any OPTIONAL parameter not specified are copied from the previous transaction.

[TRANSACTION_00]
#NOTSTOP Funktion!

#Allgememeine Kommunkitaktionseinstellungen:
LINK_TYPE=Serial
SERIAL_PORT=/dev/ttyUSB0
SERIAL_BAUD=9600

#Data bits. One of 5,6,7,8.
SERIAL_BITS=8

#Data parity. One of: even, odd, none.
SERIAL_PARITY=none

#Stop bits. One of 1, 2.
SERIAL_STOP=1

#Opóźnienie portu szeregowego między tylko dla tej transakcji.
# W ms. Domyślnie 0.
# AC10 nie nadąża, jeśli ta wartość jest za mała
SERIAL_DELAY_MS=10

MB_SLAVE_ID=1


#dla falowninka N700E rejest dla CW CCW STOP to 0002hex inaczej 2dec
#FIRST_ELEMENT= nr. pierwszego  rejsetru do odczytu lub zapisu
#podana wartośc jest podawana w dec ale nie może być 2 trzeba uzupoełnic puste 0002

#odczyt prądu wyjściowego d02 = d=0x01 02dec=0x02 0102HEX =258dec
FIRST_ELEMENT=258



#PIN_NAMES zastępuje NELEMENTS=1 nie moga one występowac razem
#ten sam przykładowy zapis w HAL: PIN_NAMES= domek NELEMENTS=1 
#net freq bestia.HzOut.domek.float <= classicladder.0.floatout-01
#net freq bestia.HzOut.00.float <= classicladder.0.floatout-01
#PIN_NAMES=cycle_start,stop,feed_hold
PIN_NAMES=A
#NELEMENTS=1

#REQUIRED unless NELEMENTS is specified: A list of element names.
#these names will be used for the pin names, e.g mb2hal.plcin.cycle_start
#NOTE: there must be no white space characters in the list


#REQUIRED: Modbus transaction function code (see www.modbus.org specifications).
#    fnct_01_read_coils               (01 = 0x01)
#    fnct_02_read_discrete_inputs     (02 = 0x02)
#    fnct_03_read_holding_registers   (03 = 0x03)
#    fnct_04_read_input_registers     (04 = 0x04)
#    fnct_05_write_single_coil        (05 = 0x05)
#    fnct_06_write_single_register    (06 = 0x06)
#    fnct_15_write_multiple_coils     (15 = 0x0F)
#    fnct_16_write_multiple_registers (16 = 0x10)

#fnct_02_read_discrete_inputs: creates boolean output HAL pins.
#fnct_03_read_holding_registers: creates a floating point output HAL pins.
#                           also creates a u32 output HAL pins.
#fnct_04_read_input_registers: creates a floating point output HAL pins.
#                         also creates a u32 output HAL pins.
#fnct_15_write_multiple_coils: creates boolean input HAL pins.
#fnct_16_write_multiple_registers: creates a floating point input HAL pins.

#The pins are named based on component name, transaction number and order number.
#Example: mb2hal.00.01 (transaction=00, second register=01 (00 is the first one))

#fnct_03_read_holding_registers: creates a floating point output HAL pins, also creates a u32 output HAL pins.

#The pins are named based on component name, transaction number and order number.
#Example: mb2hal.00.01 (transaction=00, second register=01 (00 is the first one))

 

MB_TX_CODE=fnct_03_read_holding_registers

#OPTIONAL: Response timeout for this transaction. In INTEGER ms. Defaults to 500 ms
#This is how much to wait for 1st byte before raise an error.

##St500: Kein Wert angegeben, jedoch mit 250ms getestet!
MB_RESPONSE_TIMEOUT_MS=250

#OPTIONAL: Byte timeout for this transaction. In INTEGER ms. Defaults to 500 ms.
#This is how much to wait from byte to byte before raise an error.

##St500: Kein Wert angegeben, jedoch mit 250ms getestet!
MB_BYTE_TIMEOUT_MS=250

#OPTIONAL: Instead of giving the transaction number, use a name.
#Example: mb2hal.00.01 could become mb2hal.plcin.01
#The name must not exceed 32 characters.
#NOTE: when using names be careful that you dont end up with two transactions
#usign the same name.

HAL_TX_NAME= CurrentWork

#OPTIONAL: Maximum update rate in HZ. Defaults to 0.0 (0.0 = as soon as available = infinit).
#NOTE: This is a maximum rate and the actual rate may be lower.
#If you want to calculate it in ms use (1000 / required_ms).
#Example: 100 ms = MAX_UPDATE_RATE=10.0, because 1000.0 ms / 100.0 ms = 10.0 Hz

MAX_UPDATE_RATE=0

#OPTIONAL: Debug level for this transaction only.
#See INIT_DEBUG parameter above.

DEBUG=3

[TRANSACTION_01]

MB_TX_CODE=fnct_03_read_holding_registers 
FIRST_ELEMENT=264
NELEMENTS=1
#PIN_NAMES=A
HAL_TX_NAME=HzIn
#MAX_UPDATE_RATE=100.0
DEBUG=3



[TRANSACTION_02]

MB_TX_CODE=fnct_06_write_single_register
FIRST_ELEMENT=2
#NELEMENTS=1
PIN_NAMES=command
HAL_TX_NAME=runmode
#MAX_UPDATE_RATE=100.0
DEBUG=3

[TRANSACTION_03]

MB_TX_CODE=fnct_06_write_single_register
FIRST_ELEMENT=4
#NELEMENTS=1
PIN_NAMES=Hz
HAL_TX_NAME=HzOut
#MAX_UPDATE_RATE=100.0
DEBUG=3