Mach 3 on XMD 32 + post for SolidCAM 2015

Dyskusje dotyczące najpopularniejszego programu sterującego maszynami CNC

Autor tematu
Georgi Mirov
Nowy użytkownik, używaj wyszukiwarki
Nowy użytkownik, używaj wyszukiwarki
Posty w temacie: 3
Posty: 5
Rejestracja: 03 lip 2015, 13:19
Lokalizacja: Bulgaria

Mach 3 on XMD 32 + post for SolidCAM 2015

#1

Post napisał: Georgi Mirov » 03 lip 2015, 13:30

Hello ,

I have recently bought a XMD 32 mill.
I am milling molds for carbon blades.
Using SolidWorks 2015 and SolidCAM 2015 for design and G-code

I have the following issue and don't know the reason ( owners also was unable to iddentity it).
So short explanation :
When milling 2D surfaces also constant Z milling no problems at all.
When start to mill the propeller surfaces and parting surfaces I made them on 3-4 different operation and then I put them all into one G-code.
When the machine starts to mill and mill the first operation it goes down ( on Z ) with -0,1mm and continue with next operation , then on next again the same and on the last operation I already have -0.4mm missalignement.

I think the problem is in the software reading the g-code ( I suppose so ) and I want to install Mach 3 to run the machine and also to find a postprocessor for solidcam.
I have no Idea how to setup the machine on Mach 3 can someone with experience explain or send me a link of how to do it ?



Tagi:


STELMI
Specjalista poziom 2 (min. 300)
Specjalista poziom 2 (min. 300)
Posty w temacie: 2
Posty: 551
Rejestracja: 23 mar 2008, 11:30
Lokalizacja: Bydgoszcz
Kontakt:

#2

Post napisał: STELMI » 03 lip 2015, 13:49

Write mi your e-mail, I can send you postprocessor, witch work on SolidCAM 2011 and 2014 on Mach3. Thanks to that you will be sure, that this is not a problem with postprocessor.
Years ago I had a SolidCAM 2006, witch had problem with mills that had curved end, like 10mm r1. The problem was till endmill reaches Z -1mm, when it was highier machine was jumping with Z, and offen broke mills.

Try my postprocessor and let us know how it is now
(send me an e-mail)


Autor tematu
Georgi Mirov
Nowy użytkownik, używaj wyszukiwarki
Nowy użytkownik, używaj wyszukiwarki
Posty w temacie: 3
Posty: 5
Rejestracja: 03 lip 2015, 13:19
Lokalizacja: Bulgaria

#3

Post napisał: Georgi Mirov » 03 lip 2015, 14:00



STELMI
Specjalista poziom 2 (min. 300)
Specjalista poziom 2 (min. 300)
Posty w temacie: 2
Posty: 551
Rejestracja: 23 mar 2008, 11:30
Lokalizacja: Bydgoszcz
Kontakt:

#4

Post napisał: STELMI » 03 lip 2015, 20:07

Koledzy niestety nie pomogłem. Po wgraniu mojego postprocesora nic nie dało, program generuje jakieś kółka, nie wiem czego to wina.


Autor tematu
Georgi Mirov
Nowy użytkownik, używaj wyszukiwarki
Nowy użytkownik, używaj wyszukiwarki
Posty w temacie: 3
Posty: 5
Rejestracja: 03 lip 2015, 13:19
Lokalizacja: Bulgaria

#5

Post napisał: Georgi Mirov » 04 lip 2015, 15:13

Ok I've installed mach 3 made a G-code and imported it ( I've generated it with your post) No circles.

On the megacut2D it generates circles.

Ok Now how to setup Mach3 to run on XMD32 ?

ODPOWIEDZ Poprzedni tematNastępny temat

Wróć do „Mach 2 / 3 / 4 (ArtSoft software)”