Not sure if this is the right place to put this post, but hopefully it's ok. I'm looking to identify a machine vice - if someone maybe know the logo or type it would be appreciated :) https://www.cnc.info.pl/pics/f47876f4f0beff2f2f914d6fd798c978.jpg https://www.cnc.info.pl/pics/c264c547e30485f677475...

What's the name/type of these tool holders - for a TOS FGSQ 32 cnc milling machine. https://www.cnc.info.pl/pics/4e079a647e494a0539af9a30c13b093f.jpg https://www.cnc.info.pl/pics/d9f8a788e06d0a2a51ed69e700b34cbe.jpg https://www.cnc.info.pl/pics/a87a87767cc24e7b0f09288fb3adf9d5.jpg https://www.cnc.in...

I have an older TOS FGSQ 32 cnc milling machine, and the lubricants that is specified seem to have been discontinued. Anyone know of any "replacements" for the following lubricants (that should be easily available, f.ex SKF alternatives?). Arcanol L74 NH2 Grease Structovis-P00 Then NH2 grease I thin...

For records I thought I'd post back here as I seem to have successfully repaired my original spindle drive (hoping to repair my backup as well), the things that turned out to be wrong (even though I haven't put the machine thru full rpm etc yet, but the spindle is working now) was propably caused by...

Found the issue with the "new" spindel drive, one of the outputs are "fried", and the old one won't spin up even with help, but looks fine inside - compared to the "new" one that actually somewhat works..... https://www.cnc.info.pl/pics/d46db4c14141d9de157b4f170c3e0dd0.jpg https://www.cnc.info.pl/pi...

Got somewhat further with this, after I changed the spindel drive and powersupply it still gave me the same N*NCMD "error", after doing some more troubleshooting I sent the command "M3" (spindel on), and moved over to the spindle and tried to turn it manualy - it then started to spin, and I seem to ...

Just thought I'd make a post for reference, these errors where due to some bad connection thru the DC-line - nuts not fully torqued down, so guess it became a bit "intermittant"...

I'v had trouble running the spindle, and suspected a fault in my Spindle drive (indramat kda 3.2), but all axes have been working fine, I replaced the spindle drive and Indramat powersupply unit and powered up the machine again, but then I was only able to move the Z-axis, the X/Y axis give me this ...

Can such a behaviour be caused by a failed rotation encoder ? (if it for some reason don't get any feedback from the speed encoder?) - or should that give a separate error on Heidenhain ?. A bit reluctant to take out the spindle drive if that's not the cause of the problem (a bit weired it stay "gre...

If the battery backup for some reason should fail on the 407 and I loose the settings for the machine, that files do I need to backup to be able to recover the machine ?. I'v backed up 2 files (not thinking about the drawings etc) - actually 3 files, but I think 2 of them is the same. Namely: 9000.P...